Sunday, October 27, 2013
BMW 3-series step 1 Audio update installation
Installation of the BMW 3-series step 1 Audio update (BMW speakers) 1. First of all the doors by rolling down the Windows. This will reduce the chance of scratching the glass or in the shade in the window.
2. orient yourself to the door. Please read these instructions completely before starting the installation. This will ensure that, once again, proper planning and the process goes as smoothly as possible.
3. you are now ready to begin. Starting from the passenger door, find the door handle/armrest, that runs the length of the door. Along the underside of the Panel you will see three indentions (figures 1 & 2). At the top of the handle, is one of the in front of the door handle at the bottom, and one on the back. These three bolts are a Torx T20. Remove them by turning them clockwise and placing them in a safe place where you won't lose them.
4. Locate the airbag plug towards the door behind the Panel in the middle. To remove this access panel popper. Lift off the top and bottom. This reveals another Torx T20.
5. you will also need to pop out to the side of the mirror control switch for the driver's door. To remove it, using a small flat head screwdriver, lift up the switch, from the rear and remove. This can also be done by using the Panel off a finger to push out from the inside.
6. now you can see the chrome door handle and behind a small plastic black circle (Figure 3). Delete this direct selection and you will see another Torx T20. Delete this.
7. gently insert the removal tool on the front appears at the bottom of the Panel (Figure 4). Pry the clips outward until you hear constantly free himself. 8. now, using your hands, because this reduces the chances of anything coming up the claw; Continue pulling outward from the outer edges of the door (Figure 5). Leave the upper part intact, we will remove this section at the end.
download here
