Sunday, October 27, 2013
The installation manual for the 2005 Dodge Magnum/charger Siren speaker mounting bracket
The installation manual for the 2005 Dodge Magnum/charger Siren speaker mounting bracket
1. remove the 2 plastic cover that protects the extraction of the breast, the hood (fig. 1). They are attached to, or out of the vehicle.
2. remove the 2 bolts that hold the hood decal on the Assembly and set it aside (do not disconnect the cables). Remove the horn wire and insert the wire out of the way.
3. Mount the loudspeaker rack.
4. remove the plastic rivets on the front of the body of the vehicle from the top of the pull of the body (the body is flexible) to the front of the vehicle. Slide 2 of U-nuts support braces on top and place the bracket (and the siren is attached) on the U-nuts. In front of the "ears" of the bracket that clips onto the U nuts will take two support braces. The back of the bracket mount hood latch hood latch Assembly by using the fastening at the back.
5. that all of the hood latch cables are in properly, then secure the hood latch hood latch Assembly over backward, using the two bolts to the bracket assemblies. Important: make sure that the two ends of the line are two depressions on the hood latch bolt Assembly is made by bolts to original position so that the hood latch assembly is subjected to the same drive and reinstalls well hood.
