1991 User Manual

1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons.
2. Disconnect the negative cable from the battery.
3. Remove the front bumper. • Remove the four clips from the top of the bumper. • Remove the six clips and two self-tapping screws from the bottom of the bumper. • Remove the two self-tapping screws from both ends of the bumper. • Pull out on both ends of the bumper to release the clips, then pull the bumper forward enough that you can reach behind it and disconnect the side marker lights.
4. Using scissors, cut out template A, and place it on the bumper grille by aligning the upper edge with the left upper edge of the bumper grille as shown. Tape the template. Using a pushpin, mark the bumper grille as indicated on the template.
5. Cut out template B, and tape it onto the bumper grille by aligning the lower edge with the left lower edge of the bumper grille as shown. Using a pushpin, mark the bumper grille as indicated on the template.

Download here

Installation for the 2007-2008 Honda Civic Si Sport suspension by removing the front damper
1. remove all four wheels of the vehicle on the rack.
2. remove the wheel and the brake sensor harness clip shower hose cover. Do not remove the wheel sensor connector.
3. remove the bolts and self locking nuts on the Tin Tin in a pinch. Don't let a backhand to rotate too far outwards. This can give internal CV joint bearing to unseat.
4. turn the ignition switch to ON (II), and turn on the wipers. Turn the ignition off the wipers is close to the A-pillars.
5. remove the service from the roof and the deck.
Installing the front damper
8. install the new left in the face of the damper Assembly to the frame.
9. Loosely Install flange nuts in step 6.
10. Loosely install a new damper on the pinch bolts and self-locking nuts-new sheet metal.

download manual here

Installation Summary for 2006 Honda Civic Air Conditioner Installation Manual
1. Write down the radio station presets.
2. With the ignition switch on, turn on the windshield wipers. When the wipers reach the top position turn off the ignition switch.
3. Disconnect the negative cable from the battery.
4. Inside the passenger’s compartment, remove the passenger dashboard undercover and then the glove box (two 8 mm washer-bolts for the hinges, then open the glove box to remove).
5. Remove the steel glove box lower frame (two washer-bolts.
6. Using diagonal cutters (and/or a utility knife), cut out the dashboard-link at the glove box area.
7. Remove the passenger’s heater duct (one hex screw and two self-tapping screws), and remove the harness connector clip.

We found this information in search engine is available on the internet. None of those materials are hosted in this server nor uploaded by me in someone’s servers. Read our DISCLAIMER for more detail.

2006 Honda Civic Air Conditioner here